FSA4157AP6X

Product Details

__

[ swissbit ]

X-200s Series – Industrial Slim-SATA Solid State Drive 2GByte up to 64GByte (MO-297) 5V or 3.3V supply

Feature summary

● Form factor:
o Full-sized mSATA form factor
o JEDEC MO-297 sized Solid State Drive (SSD)
o 54mm x 39mm x 4mm
o 7+15 pin (SATA+power) SATA connector
o Replacement of a standard SATA-compliant HDD
● Interface:
o SATA Rev 2.6 - 3Gbit/s (1.5Gbit/s compatible)
● Highly-integrated memory controller
o max. UDMA6 supported
o max. PIO mode 4, MDMA2 supported
o SLC NAND Flash
o Hardware BCH-code ECC (8 Bit correction per sector for SLC)
o fix drive configuration
● Low-power CMOS technology, less than 500mA (1.5W) max
● 2 Voltage types available
o 5.0V ± 10% power supply for standard types
o 3.3V ± 5% power supply for types with “-3V3” part number ending
● Optional activity LED, write protect and Quick erase switch on request
● No mechanical noise
● Wear Leveling: active wear leveling of static and dynamic data
The wear leveling assures that dynamic data as well as static data is balanced evenly across the
memory. With that the maximum write endurance of the device is guaranteed.
● High reliability
o MTBF > 2,500,000 hours
o Data reliability: < 1 non-recoverable error per 1014 bits read
o Number of connector insertions/removals: >1,000
● High performance
o Up to 300MB/s burst transfer rate in SATA II - 3.0Gb/sec
o Sustained Write performance: up to 95MB/s
o Sustained Read Performance: up to 120MB/s
● Available densities
o 2GByte up to 64GByte (SLC NAND Flash)
● S.M.A.R.T., HPA, Security and 48bit feature set
● 2 Temperature ranges
o Commercial Temperature range 0 … +70°C
o Industrial Temperature range -40 … +85°C
● Life Cycle Management
● Controlled BOM
● RoHS compatible