
⚠ All product names, trademarks, brands, and logos on this site are the property of their respective owners. Their use is for identification purposes only and does not imply any affiliation or authorization from the rights holders. We are not authorized dealers or distributors of the brand. The warranty is provided by us, not the original manufacturer.
DNET1
DNET1 - Brand New Tripp Lite IC Chips
- One-month free return and one year warranty.
- Full or Partial Refund, if the item is not as described
- Full Refund if you don't receive your order
Features:
• 8-bit HCS08 Central Processor Unit (CPU)
– Up to 20 MHz CPU at 3.6 V to 1.8 V across temperature range of –40°C to 85°C
– HC08 instruction set with added BGND instruction
– Support for up to 32 interrupt/reset sources
• On-Chip Memory
– Flash read/program/erase over full operating voltage and temperature
– Random-access memory (RAM)
– Security circuitry to prevent unauthorized access to RAM and flash contents
• Power-Saving Modes
– Two very low power stop modes
– Peripheral clock enable register can disable clocks to unused modules,
thereby reducing currents
– Very low power real time counter for use in run, wait, and stop modes with
internal clock sources
• Clock Source Options
– Internal Clock Source (ICS) — Internal clock source module containing a
frequency-locked-loop (FLL) controlled by internal reference; precision
trimming of internal reference allows 0.2% resolution and 2% deviation over
temperature and voltage; supports bus frequencies from 1 MHz to 10 MHz
• System Protection
– Watchdog computer operating properly (COP) reset with option to run from
dedicated 1 kHz internal clock source or bus clock
– Low-voltage detection with reset or interrupt
– Selectable trip points
– Illegal opcode detection with reset
– Illegal address detection with reset
– Flash block protection
• Development Support
– Single-wire background debug interface
– Breakpoint capability to allow single breakpoint setting during in-circuit
debugging
• Peripherals
– ADC — 4-channel, 10-bit resolution; 1.7 mV/°C temperature sensor; automatic
compare function; internal bandgap reference channel; operation in stop3;
fully functional from 3.6 V to 1.8 V
– ACMP — Analog comparator with selectable interrupt on rising, falling, or
either edge of comparator output; compare option to fixed internal bandgap
reference voltage; output can be tied internally to TPM input capture
– TPM — One 1-channel timer/pulse-width modulator (TPM) module; selectable
input capture, output compare, or buffered edge- or center-aligned PWM on each
channel; ACMP output can be tied internally to input capture
– MTIM — 8-bit modulo timer module with 8-bit prescaler
– KBI — 4-pin keyboard interrupt module with software selectable polarity on
edge or edge/level modes
• Input/Output
– Four GPIOs, one input-only pin and one output-only pin.
– Hysteresis and configurable pullup device on all input pins; configurable
slew rate and drive strength on all output pins except PTA5
• Package Options
– 8-pin SOIC, PDIP, and DFN
Shipping
| First item | Additional item | Service | Description |
|---|---|---|---|
| $0.00 | Free | Free Shipping | Estimated 15-30 business days via Registered Air Mail or others |
| $27.50 | Free | Expedited Shipping | Estimated delivery time is 3-5 business days, with some areas possibly taking 6-9 business days depending on the shipping address. The main courier companies include but are not limited to UPS, DHL, and FedEx. |
| $0.00 | Free | Buyer cooperating carrier | Using buyer's cooperating carrier. Buyer should create a shipping label and share it to us. And then we will call carrier for pickup |
| $38.00 | Free | Expedited Shipping | Estimated delivery time is 3-5 business days, with some areas possibly taking 6-9 business days depending on the shipping address. The main courier companies include but are not limited to UPS, DHL, and FedEx. |
Delivery
- The transportation time may be delayed due to customs clearance, local holidays or abnormal events.
- The estimated time is based on the fastest speed provided by commercial couriers (DHL, FedEx, UPS etc).
- The estimated time does not include the lead time of the item. The lead time of most items is 2–5 business days. If more than 5 working days are needed, we will manually confirm with you.
| Flag | Country | Express Delivery | Standard Delivery |
|---|---|---|---|
| United States | 3 - 5 days | 10-15 days | |
| Canada | 3 - 5 days | 10-20 days | |
| Mexico | 3 - 5 days | 10-17 days | |
| Germany | 3 - 5 days | 10-12 days | |
| Italy | 3 - 5 days | 10-15 days | |
| United Kingdom | 3 - 5 days | 10-12 days |
Estimated Delivery
This item requires 2-5 business days for processing before shipping after payment is confirmed. And depending on the destination and shipping method.
Return Policy
| Return window | Refund type | Return shipping |
|---|---|---|
| 60 days after receiving item | Money Back or Replacement | Buyer pays for return shipping |